A water connection is an essential connection point with MiniBrew. You can brew anywhere as long there is in and out let for water. 

Connect water supply

Find a water connection to connect the water inlet tube (hard black tube) to your faucet and put the outlet (soft black or white tube) into a sink. 

The tube has a length between 2 and 3 meters (6,5 to 9,5 foot). This depends on the model.Keep in mind, that a water connection is only required during cooling and cleaning phase of a brew session. The water from the tap will be not be mixed with the beer.

Pressure and flow requirements

When using water the pressure needs to be between 2 and 6 bars (29-87 psi) with a minimum flow rate of 4.5 Liters / minute (1,1 Gallon / minute).

.

Standard connection 

You will get a standard European water connector (3/4 inch) threaded connector on both side the water inlet tube. The threaded connector as outside diameter of 8 mm (0.31 inch).

Image Caption

 Adapter pieces

As each home is unique, it is possible that you have another faucet. You should measure your the outside diameter of your faucet to determine which connector piece you need. These adapter can be bought at your local hardware store.

Tip: Before your start brewing, check that all of the water connectors are attached correctly and not leaking. If you notice a leakage, check if there is black o-ring inside the standard connector.