Minibrew Help Center logo
Minibrew Help Center logo

All articles

WiFi & Electricity connectionUpdated a year ago

A wifi and electricity are essential connection points with MiniBrew. You can brew anywhere as long there is internet and electricity. 


WiFi

You need a WiFi route that supports 2.4 GHz. If you have standard 5 GHz installed, you can open 2.4 GHz band. To identify which network you have, please follow below steps:

  1. 1. Connect to the WiFi network
  2. 2a. Hold the "option" button on the computer keyboard (Mac) and click the WiFi
  3. icon for detailed information in grey about your WiFi. The the middle it will show 
  4. which channel your WiFi is using. 
  5. 2b: Open your networks panel (windows) from your taskbar click the WiFi icon 
  6. in the bottom right and than on properties

    3. Channel (Mac) or in Properties (windows)  will either say in the brackets 

  7. 2.4 GHz of 5 GHz.


If you WiFi route supports dual signal, there is a way to open up 2.4 GHz band:

  1. 1. Find IP address in the back of your router
  2. 2. Then enter it into a web browser address bar to open the configuration page
  3. 3. Enter the information in the login page. Typically is be username / password
  4. 4. Find the wireless settings page and set different name for your 2.4 GHz and 
  5. 5GHz WiFi
  6. 5. Reboot router and connect to 2.4 GHz WiFi.


Note: You only need to connect the base station to the WiFi, as it will automatically send the credentials to the Smart Keg


Electricity

The base station has a standard European grounded socket, type F power plug. The Base Station requires 220-240 volt and max 1300 watt output. The length is 1,8 meter (5 foot). The Smart keg 2.0 and 3.0 has a standard power adapter, type C power plug (110-240 Volt). The cable has a length of 0,5 meter (16 foot).


Travel adaptors

You can use a grounded travel adapter (suitable for 1500 watt+). This works in countries such a United Kingdom and Switzerland. 


Different voltage

If you are based in a country that has a different voltage (100-120 volt) a standard transformer is needed for the Base Station to work. The transformer should have an output of 220 AC and mim of 1500 watt. MiniBrew recommend 2000 watt. Here are two example you can buy at Amazon.










Was this article helpful?
Yes
No